Why Is It Important to Shift Gears Correctly?

The ability to shift from a standstill to cruising speed is given by a gear set, which is a collection of gears. In order to have a pleasant ride, changing gears is essential. But Why Is It Important to Shift Gears Correctly? This article will let you know about this.

If you can’t keep your vehicle in the proper gear while riding, your control will be decreased. However, double clutching is necessary to shift ratios on heavier vehicles with manual transmissions. As opposed to the incorrect gear, which can cause stalling, risky maneuvers, or uncontrolled revs, the proper gear will enable you to properly drive your vehicle.

Anyway, let’s get into the article to find out more details on this topic. We will tell you the importance of shifting motorcycle gear and how you can shift the perfect gear accordingly.

What Does It Mean to Shift Gears?

Generally, shifting your front gears happens when you press the left-hand shifter. A quick push and one click will shift the chain into a smaller, harder gear in the rear right hand and a smaller, softer gear in the front left hand. The chain can be moved into a larger, softer gear in the rear right hand with a long push and two clicks, and a relatively large, harder gear in the front left hand.

How Does Changing Gears Work?

The rear derailleur shifts the gears on the cassette, a collection of sprockets on the back wheel. This allows the cassette’s chain to be moved up or down.

The chain is forced onto a larger or smaller sprocket by the derailleur’s movement when it shifts gears. Typically, a beginner biker should first drag in the clutch lever initially, next shift into first gear with their left foot, drop the clutch lever progressively, and then roll on the throttle.

Also Read: Common mistakes made by beginner motorcycle riders

Why Do You Shift Gears on a Bike?

You will have less control or be unable to ride smoothly if you can’t put your car in the proper gear while you’re riding. Making smaller ring shifts with the right hand will end up making the pedaling more challenging.

It will be simpler to ride if you use your left hand to change into the lower gears. In addition, gears are the types of pulleys that assist in transferring power from your legs via the pedals and cranks, the chain, and eventually to the back wheel.

Is It Important to Shift Gears Correctly to Keep?

how do you know when to shift gears on a motorcycle
  • You must shift gears when you need to slow down, so it is obvious how important it is to do it correctly. 
  • By doing this, you’ll have extra torque and you can accelerate again if stopping is not essential, allowing you to employ engine brakes to reduce speed.
  • Matching the engine speed to the motorcycle’s road speed is the function of the gears in the transmission. 
  • The neutral gear on most bikes is placed between the 1st and 2nd gear. Put your bike in neutral every time you start and stop it. 
  • In addition to enhancing your speed, make sure you pick the right gear that can increase your stamina on longer rides and make the ride more enjoyable.

Why Is It Important to Switch Gears on a Motorcycle?

It’s important to shift gears since you might need to accelerate the bike on a smooth surface. You change the gear when the engine needs more power from you. Additionally, you choose a higher gear to accelerate faster. 

You can shift down a gear when you need to brake for an intersection, a crossroads, or due to a set of traffic lights to ease the engine’s braking. While climbing, we often choose low gear.

Some bikers have asked: Is a 7-speed bike enough for hills? Generally, a 7-speed bike is designed for flat terrain and to climb with just the right amount of incline. Therefore, choose the proper gear because changing gears is essential when riding on any kind of surface.

Related Article: Why should you be in the proper gear before starting down a hill?

When Should You Shift Your Gears?

The road’s condition truly affects when to shift gears. However, most motorcyclers often shift between 5,000 and 7,000 RPMs. Its pitch will rise as you go more quickly, and when it does, it is time to change the gear, dude!

Keep in mind that by downshifting one gear at a time, you make sure your motorcycle is prepared to accelerate again at any time. Shift just before you start climbing, not halfway up while you’re dropping down quickly and putting all your weight on the pedals.

When you have to shift on a hill, do so one gear at a time and temporarily let up on the pedal press. If you don’t downshift when you slow down, the gear that is currently linked might be too much for the sluggish speed.

See more: When to shift gears on a motorcycle at what RPM?

What Would Be The Reason For Hard Gear Shifts On My Motorbike?

bike gear hard to shift

Most frequently, because of the dragging clutch, switching gears on a motorcycle becomes complicated. As soon as you depress the clutch pedal, the disk drags and is unable to release. The clutch and engine are both running when it actually occurs.

It’s also possible that a malfunctioning shifting system is to blame for your vehicle’s poor gear shifting. As a result, shifting gears becomes more difficult due to leaks or damage to the clutch master cylinder or release cylinder.

We apologize for not mentioning that the cold bike or the importance of keeping the engine fluids clean during chilly weather can be another issue of hard-to-shift gear. It’s because unclean oil with contaminants makes gear shifting tough.

Anyway, how do you fix a hard shift on a motorcycle? It’s easy! Simply, readjusting it by releasing the locking system, pressing the clutch lever a few times, and maintaining clean gears will make it easier to shift gears properly.

Related clutch: How to fix a broken clutch cable on a Motorcycle?

What Happens If You Shift Gears Wrong?

The primary risk is transmission breakdown. If you shift without turning your pedals, your derailleurs (a front and rear shifting system) will block the chain against rear cogs or front chainrings. 

Several of the riders inquired What will happen if I shift to low gear while at very high speeds? Well, if you change to the next lower gear, you will slow down. And if you skip the following two lower gears, you will slam on the brakes.

Shifting from sixth to second instead of fourth gear makes you lose control. The car will slow down and your bike’s engine RPMs will increase if you downshift to the next lower gear.

However, if you downshift even farther, the engine may rev wildly and your wheels may potentially lock up in dangerous conditions, leading to loss of control. Additionally, you’ll hear a loud jerk and a high-pitched scratch.

Why Does My Car Jerk When I Shift Gears Manually?

The clutch plates most frequently stick to one another considerably even after the clutch has been disengaged by pulling in the clutch lever. Oftentimes, this results from a faulty clutch release when shifting gears.

Why does a motorcycle jerk when put in first gear? How do I stop my bike from jerking when I change gears? When releasing the clutch, do it gradually and after complete clutch engagement. You can upshift to second gear more smoothly if you make the gear change swiftly and declutch without making the engine rpm fall too far.

Related clutch: How to adjust clutch engagement point Motorcycle?

Is it OK to shift gears in an automatic while driving?

The rider of almost every motorcycle must manually change gears. Motorcycles are much less likely than vehicles to have fully automated gearboxes. Auto-shift gear systems are used on motor minibikes, sports bikes, scooters, mopeds, underbones, and custom cruisers.

Related Cruiser: Are Cruiser Motorcycles good for Commuting?

Can You Shift Multiple Gears At Once On A Motorcycle?

On a motorcycle, it is common to perfectly downshift or upshift gears. If your manual transmission is synchronized, it’s not necessary to try double clutching. It is stated that shifting through more than one gear requires a separate lever action.

While keeping the clutch disconnected, you can shift between several speeds without switching intermediate gears by repeatedly pushing the gear lever. But if shifting is not coordinated with the engine speed and wheel speed, dear, you will face wheel lock-up, stalling, or even a gearbox blowout.

Why Are My Gears Not Shifting Properly?

Typically, the cable tension or limitation configuration causes the gears to become disengaged. Furthermore, there are improperly adjusted derailleur limiting screws that need to be tightened. Another potential reason for it is a damaged derailleur hanger. Sometimes dirt and other small particles build up in the transmission fluid, which disturbs your gear-changing process.

What Is The Proper Way To Shift Gears On A Motorcycle?

  • Use a manual gearbox to switch gears.
  • Understand how to use the clutch, throttle, and gearshift.
  • Near the driver’s left foot is where you’ll find the gear shift lever.
  • After pushing the starter button, push the clutch to start the motorcycle.
  • You can change to a higher gear by slipping your left foot under the gear shift lever and lifting it up.
  • A gear is similar to one click.

Which Gear Is Suitable For My Speed?

The estimated speed ranges are as follows: first gear runs from 0 to 15 km/h, second at 15 to 30 km/h, third at 30 to 40 km/h, fourth at 40 to 55 km/h, and fifth and sixth at 55 km/h or over. However, the middle gear is ideal for moderate conditions on a straight road.

Also Read: Are motorcycles faster than cars


1. How do gears affect speed?

Traditionally, you move up through the gears as the car’s speed rises and down through the gears when you require the engine’s extra power. The maximum speed rises with a lower or taller gear ratio, while the speed is increased with a higher or shorter gear ratio.

2. Can you change gears while braking?

Yes, you can shift gears while using the brakes. However, there is no necessity to apply the brake or suddenly disengage the throttle whenever a gear change is required.

3. Does shifting the gears early damage the gearbox?

Early gear changes have an impact on the vehicle’s power and performance, but more significantly, they put excessive pressure on the higher gears by increasing the necessity for them to produce the necessary torque at a set speed.

4. Why do we need gears in bikes and cars?

When a vehicle wants to accelerate or generate more force, gears are important. The main purpose of gears is to modify the engine’s output of torque and speed to the wheels.

Also Read: How many brake pads per wheel?


So, shifting gears is the first priority when you ride a bike. It’s crucial to shift gears to balance yourself and accelerate the speed. After reading this article, you might have understood why it is important to shift gears correctly as there is a risk of an accident when you pick the wrong gear.

We have also mentioned when and how you should shift your bike gears on any type of surface. If you find the article helpful, keep visiting our site for more content on motorcycle issues.

Share on:

Hello, this is Adam Willam, the owner and author of the website- "motobikekit.com". I have been passionate about biking since I was a child and have always been fascinated by the mechanics of how bikes work. When I became old enough, I started my own business of repairing and customizing bikes. By doing this I have quickly gained a reputation for being the go-to guy for bike repairs and customizations and have been running my shop successfully for many years.

Leave a Comment