How To Start A Motorcycle That Has Been Sitting For 2 Years

If you’re like most motorcycle enthusiasts, you probably can’t stand the thought of your bike sitting idle for too long. But the fact is, life is colorful, and sometimes your motorcycle might have to sit for a while. If that’s the case, don’t worry! There’s still hope for your motorcycle. With a little bit of effort, you can get your motorcycle running again, even if it’s been sitting for a while. Here’s how to start a motorcycle that has been sitting for 2 years.

Related Article: How long do motorcycles last?

How to Start a Motorcycle That Has Been Sitting for 2 Years

motorcycle sitting for 1 year

If your motorcycle has been sitting for two years, it’s likely that the battery is dead and the tires are flat. To get your motorcycle running again, you’ll need to jumpstart the battery and inflate the tires.

Before you start working on your motorcycle, make sure that you have the proper tools and safety gear. You’ll need a set of jumper cables, a working battery, and an air compressor. You should also wear gloves, eye protection, and sturdy shoes.

Once you have everything you need, follow these steps to start your motorcycle:

1. Inspect your motorcycle for any damage

If you find any leaks or broken parts, repair them before proceeding.

2. Drain the fuel from the float bowl 

If your motorcycle has a carburetor, drain the fuel from the float bowl. This will prevent the carburetor from flooding when you try to start the engine.

Related carburetor: best carburetors for Harley Davidson

3. Jumpstart the battery

Connect the jumper cables’ positive ends, one to the dead battery’s positive terminal and the other to the positive terminal of the functional battery. Next, connect the jumper wires’ negative end to the functional battery’s negative terminal.

See more: How long do car batteries last?

4. Try to start the engine

If it doesn’t start, check the connections of the jumper cables and make sure that the working battery has enough power.

5. Keep the engine on for a few minutes

Once the engine is running, let it idle for a few minutes. This will allow the oil to circulate and lubricate the engine.

6. Inflate the tires to the proper pressure

Use an air compressor to inflate the tires to the manufacturer’s recommended pressure.

7. Take your motorcycle for a test ride

Make sure to take it easy at first, and gradually increase your speed.

By following these steps, you should be able to get your motorcycle up and running again after it’s been sitting for a while.

What to Do if Your Motorcycle Won’t Start

what to do if your motorcycle won't start

After trying the basic motorcycle restarting process, if your bike is still not functioning then there may be more problems have been occurs. Such as waste spark plugs, unclean carburetors, etc. Let’s see how can you fix your motorcycle that has been sitting for 2 years.

Related spark plug: best spark plugs for Harley Davidson

1. Replace Spark Plug

If your motorcycle has been sitting for a while, it’s likely that the spark plug has gone bad. A quick and easy fix is to replace it with a new one.

See more: how to change spark plugs on a Harley?

2. Clean Carburetor

Another reason why your motorcycle might not be starting is that the carburetor is dirty. Over time, the carburetor can get clogged with dirt and grime, which prevents it from working properly. To clean it, you’ll need to remove it from the motorcycle and disassemble it. Then, use a carburetor cleaner to remove all the dirt and grime.

Also Read: how to wash a motorcycle?

3. Change Oil

If your motorcycle has been sitting for a long time, the oil might have gone bad. Old oil can cause all sorts of problems, including engine damage. To be safe, it’s always a good idea to change the oil before you start the motorcycle.

4. Check all wires

If your motorcycle is not starting, it could be because of a loose wire. Check all the wires on your motorcycle to make sure they are tight and not loose.

By following these steps your bike should start again. But if you failed to start your bike, you should take your bike to a professional mechanic. 

Why You Should Start Your Motorcycle Regularly

how long can a motorcycle sit without starting

If you’re a motorcycle owner, you know the importance of starting your bike regularly, even if you’re not planning on going for a ride. Here are four good reasons to keep your motorcycle in good running order by starting it up on a regular basis:

1. To Prevent Rust and Corrosion

If you live in an area with high humidity, salt air, or heavy rains, your motorcycle is especially susceptible to rust and corrosion. Starting your motorcycle regularly will help to circulate the engine oil and prevent moisture from building up and causing damage.

2. To Maintain Battery Charge

Your motorcycle’s battery will self-discharge over time, even if the bike is not being used. If you live in a cold climate, this discharge is accelerated, as the battery has to work harder to start the engine in cold weather. Keeping your battery charged will prolong its life and save you money in the long run.

See more: Motorcycle battery maintenance guide

3. To Keep the Tires in Good Condition

If you leave your motorcycle sitting for long periods of time, the weight of the bike can cause flat spots to form on the tires. These flat spots can be permanent and will reduce the life of your tires. Starting your motorcycle and taking it for a short ride will help to keep the tires in good condition.

Related tire: How much are motorcycle tires?

4. To Preserve the Value of Your Investment

If you ever decide to sell your motorcycle, it will be worth more if it is in good condition. Starting your motorcycle regularly will help to keep it in good condition and preserve its value.

So, there you have it! Four good reasons to start your motorcycle regularly, even if you’re not planning on going for a ride. Your motorcycle will thank you for it!

Also Read: are Motorcycles cool?

The Bottom Line

It is important to ride a bike even though you don’t need to ride. it will keep the bike’s battery and engine functioning well. But if your bike is been sitting for a long time then you have to follow our provided guidelines to restart your bike. However, if you don’t have any knowledge about bike maintenance or, you have tried but failed to start your bike then it will be better to take help from a mechanic.

Share on:

Hello, this is Adam Willam, the owner and author of the website- "". I have been passionate about biking since I was a child and have always been fascinated by the mechanics of how bikes work. When I became old enough, I started my own business of repairing and customizing bikes. By doing this I have quickly gained a reputation for being the go-to guy for bike repairs and customizations and have been running my shop successfully for many years.

Leave a Comment