Homemade Carburetor Cleaner- Wash Your Curb Now!

The carburetor is one of the constituent parts of the bike’s fuel system. Due to the huge presence of moving elements, it becomes heavily contaminated during the combustion process, affecting the power unit’s stability. So, the question comes to how often should you clean the carburetor on a motorcycle. Minimum once a year but better after every 6 months. But how about homemade carburetor cleaner?

There are many types of carb cleaners like aerosol carburetor cleaners on the market. It comprises ingredients that melt the gunk and leave the engine clean. However, you can make your own carb cleaner easily that works well.

This blog post will give you instructions on making this homemade carburetor cleaner and what you need to do properly.

Read Also: 5 Best Carburetors for Harley Davidson 2022

When to clean the carburetor motorcycle?

As you know, a carburetor’s main task is to combust the mix of gasoline and air. Through this process, the carburetor powers the engine to propel the vehicle. So, check your carburetor first when you feel your engine performance is reducing, engines are backfiring or overheating, and your exhaust is emitting black smoke. Also, if you are facing the starting difficulty of your vehicle, don’t ignore it; clean your carburetor first.

Can you make Homemade Carburetor Cleaner?

Yes, you can. Just you need primary knowledge of the key ingredients of commercial formulas. However, making homemade carburetor cleaner is ideal for bikers who don’t want to spend money on commercial carb cleaners. Once you have made this, all of your bikes will run better as they are needed most!

Does DIY carb cleaner solution really work?

Yes, it does! As we know, the main enemy of carburetors is a dirty fuel, which may malfunction during the fuel on and air mixture. For example, if there’s a lot of fuel and little air or conversely it will affect the combustion system of the engine.

So, if you use an ultrasonic carb cleaner solution properly it will not only boost the carburetor’s life but also carburetor components. Yet, the clean carburetor restores the engine performance and improves mileage.

Process of Homemade Carburetor Cleaning

Before you get started, you need to inspect its dirt. If there are signs of carbon residues or soot and rust, then it requires some cleaning. So, how to clean a motorcycle carburetor?

Courtesy: Motorcyclist Magazine

However, here are the carburetor cleaning process-

  1. First, diluting or softening cleaner
  2. Then, clear air filter
  3. Now, remove the carburetor and carburetor float
  4. Take out other removable components
  5. Soak and scrub those components
  6. Rinse them and let them dry
  7. Finally, reassemble and install your carburetor again.

Note: Before making the process, make sure your carburetor is cool.

How To Make Homemade Carburetor Cleaner

You should be aware of the proper substances to combine when producing your own carb cleaning. MEK, acetone, xylene, propane, toluene, and ethylbenzene are the main components of the carb-cleaning solution.

Note: Additives are among the ingredients found in cleaning solutions for carburetors. Acids, organic, and inorganic chemicals like benzene and toluene are included in the list. As a result, mixing cocktails can harm other carburetor components.

Here, we have given 6 methods to make your own carb cleaner. Let’s dig into it and clean it carefully!

Method 1: A blend of methylene chloride or MEK or Acetone

To get started with this method, you can soak your carburetor in acetone. Then, mix it with diesel or gasoline for it to deliver a long-lasting result. Next, you can use a soft brush to get rid of the residue. Then, leave it to dry.

 Method 2: Use alcohol, acetone, Xylol, and paint thinner

Here you’ll need at least equal parts of alcohol, acetone, Xylol, and one-gallon paint thinner. Mix the ingredient in a container and submerge the carburetor. The advantage of this blend is that it dissolves the residue or the gloss that forms on the carburetor. Like other methods above, you can use a wire brush to clean the residue.

  • Alcohol alone is a weak solvent and may not adequately dissolve the varnishes or gums that form in your bike’s carburetor or the passages.
  • However, you can mix with either acetone or Methyl Ethyl Ketone, or Xylol, or use paint thinner.

Method 3: Use Methyl Chloride and kerosene

The following method involves mixing methyl chloride and kerosene in a container. First, ensure you have a high concentration of methyl chloride, which will work as the paint thinner. It should be highly concentrated so that the kerosene mixes well. Next, submerge your carburetor and the container overnight. Ensure it’s super tight for better results.

Method 4: A blend of MEK and alcohol or Xylene

A mixture of MEK and alcohol or Xylene can make an excellent carburetor cleaner since it dissolves residue build-up.

Method 5: Use brake cleaning solution

Another option is to use a brake cleaner. The advantage of this product is that it has a unique formulation that dissolves the grease or grip from building up. Thus, it works ideally, just like commercial carburetor cleaners.

Method 6: Aerosol carb cleaner

wd-40 specialist carb/throttle cleaner

Tips:

When cleaning the carb, you should pay attention to the filters, external mechanisms, and assemblies. You also need to clean the outer part. For this, you can dismantle the carburetor from the bike and perform an external wash using an aerosol cleaner.

Related Article: What was the first Harley Davidson carburetor made of?

FAQ Part

Q. Can vinegar clean a carburetor?

Yes. Some riders use vinegar since it’s readily available and affordable. To get started, dismantle the carburetor. Next, fill the back with vinegar and ensure the carburetor is fully submerged. You can use a tiny wire brush to remove the debris or residue. Finally, rinse with a solution of water and baking soda. Leave the equipment to dry for 1 to 2 days before assembling the carburetor.

Warning: We discourage using vinegar because it makes metal susceptible to rust.

Summing up

Cleaning your bike’s carb requires care to avoid damaging your machine. Luckily, you can save money and ensure your equipment stays in good shape along with a few homemade solutions.

Read Also:

Share on:

Hello, this is Adam Willam, the owner and author of the website- "motobikekit.com". I have been passionate about biking since I was a child and have always been fascinated by the mechanics of how bikes work. When I became old enough, I started my own business of repairing and customizing bikes. By doing this I have quickly gained a reputation for being the go-to guy for bike repairs and customizations and have been running my shop successfully for many years.

Leave a Comment